Invited Lectures/Talks
 A. Ramazani, U.
Prahl, R. Larson, “Multiscale modeling of bakes hardening effect on the
mechanical behavior of DP steels”, Highlighted Lecture, MSE 2016, Darmstadt, Germany,
September 27 29, 2016.
 A. Ramazani, T.
Mandal, R. Larson, “Modeling the lipoprotein corona formation around inorganic nanoparticles as a function of their ed molecular dynamics simulation hydrophobicity using coarse grain”, Amirkabir University of Technology, Tehran, Iran, August 28, 2016.
 A. Ramazani, S. Kazemiabnavi, M. Abbasi, U. Prahl, “Failure initiation mechanisms in complex microstructures: interface decohision versus martensite cracking ”, Sitzung des DGM Arbeitskreis Mikrostrukturmechanik, Karlsuhe Institute of Technology (KIT), Germany, Oct. 19, 2015.
 A. Ramazani, Wenwen Song, Xiaoxao Li, Ulrich Prahl, “Integrative
Computational Materials Engineering (ICME) towards an improved
understanding of Bainite in high and low carbon steels”, International
Symposium on Plasticity and Its Current Applications, Hilton Rose Hall
Resort & Spa, Montego Bay, Jamaica, January 49, 2015.
 H.C. Yu, L. Aagesen,
A. Ramazani, K. Thornton, “PhaseField Models with Smoothed Boundary
Methods: Powerful Tool for Modeling Nano/Microstructure Evolution”, The
third international symposium on phasefield method (PFM2014), State
College, PA, USA, Aug. 2629, 2014.
 A. Ramazani, K. Mukherjee, A. Schwedt, P. Goravanchi, U. Prahl, W.
Bleck, “Quantification of the effect of transformationinduced
geometrically necessary dislocations on the flowcurve modelling of
dualphase steels”, International Symposium on Plasticity and Its
Current Applications, Grand Lucayan Resort, Bahamas, January 38,
2014.
 A. Ramazani, “Atomistic simulation of mechanical properties of graphene
for NEMS applications”, Advanced School on Graphene and Its
Optoelectronic Devices, University of Tabriz, Tabriz, Iran, May
2728, 2013.
 A. Ramazani, U. Prahl, “Microstructure based failure model DP steels”, Materials
Mechanics Seminar, invited presentation, TU Stuttgart, Stuttgart,
Germany, May 13, 2013.
 A. Ramazani, P.
Pinard, A. Schwedt, S. Richter, U. Prahl, W. Bleck, “Characterization of
microstructure and modelling the flow curve behaviour of bainite aided
DP steel”, Sitzung des DGM Arbeitskreis Mikrostrukturmechanik,
Geesthacht, Germany, Feb. 4, 2013.
 A. Ramazani, U. Prahl, W. Bleck, “Correlation between 2D and 3D RVE
modelling of flow curve in DP steels using a microstructurebased RVE
approach”, Amirkabir University of Technology, Tehran, Iran, Jan. 19,
2013.
 A. Ramazani, U. Prahl, “Microstructure based failure model DP steels
using XFEM”, Amirkabir University of Technology, Tehran, Iran, Jan.
19, 2013.
 A. Ramazani, U. Prahl, W. Bleck,“Correlation between 2D and 3D RVE
modelling of flow curve in DP steels using a microstructurebased RVE
approach”, Materials Modelling Colloquium, TU Stuttgart, Stuttgart,
Germany, April 19, 2012.
 A. Ramazani, H. Quade,
U. Prahl, W. Bleck, “Correlation between 2D and 3D RVE modelling of
flow curve in DP steels”, Gesellschaft für Materialkundeh (DGM)
Workshop, Siegen, Germany, March 9, 2012.
 A. Ramazani, U. Prahl, W. Bleck, “Incorporating transformation induced GND effect into microstructure based flow curve prediction of DP steels”, M2i Annual Conference, Noordwijkerhout, The Nederland’s, Dec. 12, 2011.
 A. Ramazani, U. Prahl,
W. Bleck, “Incorporating transformation induced GND effect into
microstructure based flow curve prediction of DP steels”, Deutsche
Gesellschaft für Materialkundeh (DGM) Workshop, Braunschweig, Germany,
Sep. 30, 2011.
Talks & Posters A. Ramazani, V. Sudararaghavan, “Multiscale modeling of deformation response of Polycrystalline Alloys using orientation distribution functions”, ICME 2017, Ypsilanti, MI, USA, May 2125, 2017.
 A. Ramazani, V. Sudararaghavan, “Crystal plasticity simulation of Aluminum Lithium alloy: Verification and Experiments”, 2017 MRS Spring Meeting & Exhibit, Phoenix, Arizona, USA, April 1721, 2017.
 A. Ramazani, A. Soleimani, A. Reihani, V. Sudararaghavan, R. Larson, “The effect of nanotube length and temperature on phonon transport and thermal conductivity of graphyne nanotubes”, 2017 MRS Spring Meeting & Exhibit, Phoenix, Arizona, USA, April 1721, 2017.
 A. Ramazani, V. Sudararaghavan, “Crystal plasticity simulation of Aluminum Lithium alloy: Verification and Experiments”, 2016 MRS Spring Meeting & Exhibit, Phoenix, Arizona, USA, March 28April 1, 2016.
 G. Moeini, A. Ramazani, R. Larson, G. Koenke, “Micromechanical modeling of fatigue behavior of DP steels”, MSE 2016, Darmstadt, Germany, September 2729, 2016.
 A. Ramazani, T. Mandal, R. Larson, “Modeling the hydrophobicity of inorganic nanoparticles using coarse grained molecular dynamics simulations”, 2016 MRS Spring Meeting & Exhibit, Phoenix, Arizona, USA, March 28April 1, 2016.
 A. Gheisarian, M. Abbasi, M. Zahedifar, M. Rezaei, A. Ramazani,
The effect of aging treatment on microstructure, mechanical properties
and corrosion resistance of Ti6Al4V alloy, iMAT 2015, Tehran, Iran,
Nov. 910, 2015.
 L. Aagesen, A. Ramazani, J. Kim, P.
Braun, K. Thornton, "PhaseField Simulations of Eutectic Alloy
Solidification into Templates for Photonic Metamaterials", 13th U.S.
National Congress on Computational Mechanics (USNCCM13), San
Diego, CA, USA, July 2630, 2015.
 A. Ramazani, V.
Tomeckova, L. Aagesen, D. Lee, J. Halloran, K. Thornton “The Effect of
Template Geometry on the Eutectic Growth of Directionally Solidified
Binary Organic Metamaterials: A PhaseField Study”, TMS 2015, Orlando,
FL, USA, March 1519 2015.
 A. Ramazani, L.
Aagesen, J. Kim, P. Braun, K. Thornton, Phase field modeling of
eutectic growth by directional solidification for nanophotonic
metamaterials, MS&T 2014, Pittsburg, PA, USA, Oct. 1216, 2014.
 A.
Ramazani, U. Prahl, A. Schwedt, A. Aretz, “Quantification of the effect
of transformationinduced geometrically necessary dislocations on the
flowcurve modelling of dualphase steels”, MS&T 2014, Pittsburg,
PA, USA, Oct. 1216, 2014.
 A.
Ramazani, N. Arsalani,
V. Shirazi Khanamiri, “Development and characterization of
GraphenePolyaniline (GNS/PANI) Nanocomposite for conductive inks
applications”, MS&T 2014, Pittsburg,
PA, USA, Oct. 1216, 2014.
 A. Ramazani, S.
Bruehl, U. Prahl, W. Bleck, “BakeHardening effects in dualphase
steel”, 23rd International Workshop on Computational Mechanics of
Materials (IWCMM 2013), Singapore, Oct. 24, 2013.
 A. Ramazani, M.
Eftekhari, U. Prahl, S. Schmauder, “Study the mechanical properties of
graphyne nanoribbon using molecular dynamics”, 23rd International
Workshop on Computational Mechanics of Materials (IWCMM 2013),
Singapore, Oct. 24, 2013.
 K.C. Komerla, A. Ramazani, U. Prahl, W.
Bleck, “Comparison of crystal plasticity finite element method and J2
plasticity approach in predicting failure initiation of DP steels”, 23rd
International Workshop on Computational Mechanics of Materials (IWCMM
2013), Singapore, Oct. 24, 2013.
 U. Prahl, A. Ramazani,
“Modelling the process chain of cold rolled dual phase steel for
automotive application”, 2nd World Congress on Integrated Computational
Materials Engineering (ICME 2013), Salt Lake City, UT, USA, July 7th
11th, 2013.
 U. Prahl, H. Quade, A.
Ramazani, W. Bleck, “Influence of microstructural banding on flow curve
and failure in TRIP steels”, MEFORM 2013 – Simulation von Umformprozessen, Tagungsband, Freiberg, March 2022, 2013.
 A. Ramazani, U. Prahl,
W. Bleck, P. Pinard, A. Schwedt, A. Aretz, “Microstructure based
failure model DP steels using XFEM”, Local Mechanical Properties 2012
(LMP 2012), Levoča, Slovakia, Nov. 79, 2012.
 A. Ramazani, A.
Schwedt, A. Aretz, M. Spaehn, U. Prahl, “Failure initiation in DP steels
– Part 1: Microstructure based modelling and model parameter
identification for DP600”, 22nd International Workshop on Computational
Mechanics of Materials (IWCMM 2012), Sep. 2426, 2012.
 A.
Ramazani, A. Schwedt, A. Aretz, M. Spaehn, U. Prahl, “Failure initiation
in DP steels – Part 2: Application and generalization on different DP
steel grades”, 22nd International Workshop on Computational Mechanics of
Materials (IWCMM 2012), Sep. 2426, 2012.
 P. Pinard, A. Schwedt,
A. Ramazani, U. Prahl, S. Richter, “Better identification of dual phase
steel constituents by combined EBSD and high resolution EPMA carbon
measurements”, Microscopy and Microanalysis conference 2012 (M&M
2012), Phoenix, AZ, USA, July 30  Aug. 2, 2012.
 P. Pinard, A. Schwedt,
A. Ramazani, P. Suwanpinij, U. Prahl, S. Richter, “Identification of
steel phases and constituents by combined EBSD and high resolution EPMA
carbon measurements”, European Microbeam Analysis Society Workshop 2012
(EMAS 2012), Padua, Italy, Jun.17th20th 2012.
 P . Pinard, A.
Schwedt, A. Ramazani, H. Quade, P . Suwanpinij, U. Prahl, S. Richter,
“Bainite identification by combined EBSD and EPMA measurements”, Royal
Microscopy Society EBSD 2012, NPL, London, England, March 2628,
2012.
 A. Ramazani, M.
Abbasi, U. Prahl, W. Bleck, “Damage prediction in the cross die test of
multiphase steels using GTN model and FLC criterion”, the 21st
International Workshop on Computational Mechanics of Materials
(IWCMM21), Limerick, Ireland, Aug. 2224, 2011.
 A. Ramazani, K. Mukherjee, U. Prahl, W. Bleck, “Modelling the effect of microstructural banding on the work hardening behaviour of dualphase (DP) steels”, 20th International Workshop on Computational Mechanics of Materials (IWCMM20), Loughborough, England , Sep. 810, 2010.
 B. Gholamzadeh, F.
Halimi, H. Halimi, A. Ramazani, “An Experimental and Numerical Study on
the Formality of Al 5083 Alloy in Uniaxial Compression Test”, the 11th
Iranian Conference on manufacturing Engineering (ICME 2010), Tabriz,
Iran, Oct. 1518 2010.
 A. Ramazani,
R. Mahmudi, “Barreling of Leaded Bronze in Uniaxial Cold Upsetting”, 3rd Conference of Metals and Materials Deformation,
MATFORM’85, Tehran, Iran, May. 810, 2006.
 A. Ramazani,
M. H. Parsa, R. Mahmudi, “Strain Instability of Aluminum and Brass in
Cold Upsetting”, 9th Annual Congress of Iranian
Society of Metallurgy Engineers, Shiraz, Iran, Oct. 1518, 2005.

